Yamaha 301, 303, CVP-305

Using, Creating and Editing Voices

Voice Creating (Sound Creator)

CVP-305/303/301 Owner’s Manual 95

Editable Parameters in the SOUND CREATOR [ORGAN FLUTES]

displays

The following covers in detail the editable parameters that are set in the displays

explained in step 3 of the “Basic Procedure” on page 89. The Organ Flutes param-

eters are organized into three different pages. The parameters in each page are

described separately, below. These are also treated as part of the Voice Set parame-

ters (page 96), which are automatically called up when the Voice is selected.

FOOTAGE, VOLUME/ATTACK (common parameters)

FOOTAGE

VOLUME/ATTACK

ORGAN TYPE Speciﬁes the type of organ tone generation to be simulated: Sine or

Vintage.

ROTARY SP SPEED Alternately switches between the slow and fast rotary speaker

speeds when a rotary speaker effect is selected for the Organ Flutes

(see “EFFECT/EQ” DSP TYPE parameter on page 93), and the Voice

Effect DSP (page 93) is turned on (this parameter has the same effect

as the Voice Effect VARIATION ON/OFF parameter).

VIBRATO ON/OFF Alternately turns the vibrato effect for the Organ Flutes Voice ON or

OFF.

VIBRATO DEPTH Sets the Vibrato depth to one of three levels: 1 (low), 2 (mid), or 3

(high).

Footage:

The term “footage” is a reference

to the sound generation of tradi-

tional pipe organs, in which the

sound is produced by pipes of

different lengths (in feet).

16' ←←

←← →→

→→ 5 1/3' Switches the controllable footage (by using the [D] button), between 16'

and 5 1/3'.

16'–1' Determines the basic sound of the organ ﬂutes. The longer the pipe, the

lower the pitch of the sound. Hence, the 16' setting determines the low-

est pitched component of the Voice, while the 1' setting determines the

highest pitched component. The higher the value of the setting, the

greater the volume of the corresponding footage. Mixing various vol-

umes of the footages lets you create your own distinctive organ sounds.

VOL Adjusts the overall volume of the Organ Flutes. The longer the

graphic bar, the greater the volume.

RESP Affects both the attack and release (page 92) portion of the sound,

increasing or decreasing the response time of the initial swell and

release, based on the FOOTAGE controls. The higher the value, the

slower the swell and release.

VIBRATO SPEED Determines the speed of the vibrato effect controlled by the Vibrato

On/Off and Vibrato Depth above.

MODE The MODE control selects between two modes: FIRST and EACH.

In the FIRST mode, attack is applied only to the ﬁrst notes played

and held simultaneously; while the ﬁrst notes are held, any subse-

quently played notes have no attack applied. In the EACH mode,

attack is applied equally to all notes.

4', 2 2/3', 2' These determine the attack sound volume of the ORGAN FLUTE

Voice. The 4', 2-2/3' and 2' controls increase or reduce the volume

of attack sound at the corresponding footages. The longer the

graphic bar, the greater the attack sound volume.

LENG Affects the attack portion of the sound producing a longer or shorter

decay immediately after the initial attack. The longer the graphic

bar, the longer the decay.