Yamaha DSP-AX750SE Displaying information about the input, Select the input source, Straight

PLAYBACK

Notes

3 Press u / d to display the following

• When you play DTS-encoded CD/LDs with the input mode set				information about the input signal.
to AUTO:
– This unit automatically switches to the DTS decoding mode.						+
The unit remains in DTS mode (and the t indicator may
						TV VOL
flash) for up to 30 seconds after playback of the DTS source is
complete. To manually release the DTS mode, press INPUT					CH	TV MUTE	CH
					–		+
MODE to reselect AUTO.						SELECT
					PRESET		PRESET
– The DTS decoding mode may be released if search or skip						TV VOL
operations are performed for more than 30 seconds. To						–
prevent this, press INPUT MODE to select DTS.
• If the digital output data of the player has been processed in any				(Format)	Signal format display. When the unit
way, you may not be able to perform DTS decoding even if you
					cannot detect a digital signal it
make a digital connection between this unit and the player.
					automatically switches to analog input.
Displaying information about the input
				in	Number of source channels in the input
source					signal. For example, a multi-channel
You can display the type, format and sampling frequency					soundtrack with 3 front channels, 2
of the current input signal.					surround channels and LFE, is
					displayed as “3/2/LFE”.
1 Select the input source.				fs	Sampling frequency. When the unit is
					unable to detect the sampling
A	B	PHONO	MULTI CH IN		frequency “Unknown” appears.
V-AUX	TUNER	MD/CD-R	CD	rate	Bit rate. When the unit is unable to
					detect the bit rate “Unknown” appears.
DTV/CBL	VCR 1	DVR/VCR2	DVD	flg	Flag data encoded with DTS or Dolby

Digital signals that cue this unit to automatically switch decoders.

2Press AMP to select the AMP mode, then press STRAIGHT (EFFECT) so that “STRAIGHT” appears in the display.

AMP STRAIGHT

then

EFFECT

STRAIGHT

38