Yamaha DV-C6280 ■ DVD, ■Returning setup menu to the factory-setting, ■Video CD

TROUBLESHOOTING

■ DVD

PROBLEM	POSSIBLE CAUSE	WHAT TO DO	Refer to
			Page
Picture does not match	The setting at ‘6 TV Aspect’ on the setup	Select the proper position.	28
your video monitor.	menu is not correct.
Audio track and/or	The disc does not contain the language you		—
subtitle language is not	have selected.
the selected one.
No subtitles.	The disc does not have subtitles.		—
	Subtitle is turned off.	Show subtitles by pressing SUBTITLE or	21, 23
		using on-screen menu.
Angle cannot be	The disc or the scene being played does not		—
changed.	support multi-angle.
No sound from effect	The setting at ‘7 Digital Audio Output’ on the	If your AV amplifier has built-in decoders for	29
speakers (center and	setup menu is not correct.	Dolby Digital, DTS or MPEG, Select
rear left/right) when		‘Bitstream’ at corresponding position.
digital signals from this
unit are selected as the
input source on your
AV amplifier.
No sound when playing	Digital connection is not made between this	Make digital connection between this unit	9, 29
a disc encoded with	unit and your amplifier.	and your amplifier and adjust the settings at
DTS.		‘7 Digital Audio Output’ on the setup menu.
The password for		Clear all settings on the setup menu. See	—
setting parental level		‘Returning setup menu to the factory-setting’
has been forgotten.		below this table.

■Returning setup menu to the factory-setting

While playback is stopped, press and hold d (PAUSE), and then t and PLAYXCHANGE on the front panel until ‘Initial- ized’ appears on the video monitor. All settings on the setup menu return to the factory settings.

■Video CD

PROBLEM	POSSIBLE CAUSE	WHAT TO DO	Refer to
			Page
Menu does not appear. The disc does not have playback control			—
	function.

32