A
R6/LR6, AA,
B
Remote control signal sensor
|
|
| About 23 feet | |
|
|
| ||
|
|
| (7 meters) | |
| 30°� | 30°� | in front of the | ||
signal sensor | ||||
|
|
| ||
Transmission 
window
Remote control preparations
»A Battery installationUse of batteries³Align the poles (i and j) properly when inserting the batteries. ³Do not mix old and new batteries or different types of batteries. ³Do not recharge ordinary dry cell batteries.
³Do not heat or disassemble the batteries. Do not allow them to contact flame or water.
³Remove the batteries if the unit is not to be used for a long time. ³Do not keep together with metallic objects such as necklaces. ³Do not use rechargeable type batteries.
³Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any part of your body.
»B Correct method of useOperation notes³Do not place obstacles between the remote control signal sensor and remote control unit.
³Do not expose the remote control signal sensor to direct sunlight or to the bright light of a fluorescent light.
³Take care to keep the remote control signal sensor and end of the remote control unit free from dust.
³If this system is installed in a rack with glass doors, the glass doors’ thickness or color might make it necessary to use the remote control a shorter distance from the system.
To prevent damage³Never place heavy items on top of the unit. ³Do not disassemble or reconstruct the unit. ³Do not spill water or other liquids into the unit.
Getting Started
5