Operation

OPEN CLOSE

Loading discs

1Press OPEN/CLOSE on the front of the player.The disc tray opens.

2Load your chosen disc in the tray, label side up (also when a double sided DVD is inserted). Make sure it is sitting properly in the correct recess.

3Press OPEN/CLOSE, to close the tray.

➤READ appears in the status window and on the player display, and playback starts automatically.

Note: If ‘Child Lock’ is set to ON and the disc inserted is not in the ‘child safe’ list (not authorized), the 4-digit code must be entered and/or the disc must be authorized (see ‘Access Control’).

Playing a DVD-video disc

Playing a title

➤After inserting the disc and closing the tray, playback starts automatically and the status window and the player display show the type of disc loaded, as well as information about the disc’s contents and playing time.

The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numerical key; if not, use the w/v, t/u keys to highlight your selection, then press OK.

➤The currently playing title and chapter number are displayed in the menu bar and the player display.

The elapsed playing time is shown in the status window and the player display.

●If required, you can select Stereo, Dolby Surround or 3D-Sound by using the d (Sound) in the menu bar.

Play may stop at the end of the Title, and the player may return to the DVD menu.To go on to the next title, press 2.

●To stop play at any other time, press 9.

➤The default screen will appear, giving information about the current status of the player.

●You can resume play from the point at which you stopped play. Press 2; when you see the Resume icon . on the screen, press 2 again.

➤The RESUME feature applies not only to the disc in the player, but also to the last four discs you have played. Simply reload the disc and press 2; when you see the Resume icon . on the screen , press 2 again.

Note: Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes. Discs can have an optional region code. If you load a disc of a different region code into your player, you will see the region code notice on the screen.The disc will not play and should be removed from the player.

24OPERATION