1To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.
2Install this unit in a well ventilated, cool, dry, and clean place with at least 2.5 cm (1 inch) above, behind and on the both sides of this unit - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
3Position this unit away from other electrical appli- ances, motors and transformers to avoid humming sounds, do not place this unit where it may get exposed to rain or any kind of liquid to prevent fire or electrical shock.
4Avoid extreme temperature swings or excessive use of humidifier in the room where this unit is installed to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.
5Do not cover this unit with a newspaper, a table- cloth, a curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit and/or personal injury.
6Avoid installing is unit in a place where foreign
objects and liquid might fall. It might cause a fire, damage to this unit and/or personal injury. Do not place the following objects on this unit:
•Other components, as they may cause damage and/or discoloration on the surface of this unit.
•Burning objects (i.e., candles), as they may cause fire, damage to this unit and/or personal injury.
•Containers with liquid in them, as they may cause an electrical shock to the user and/or damage to this unit.
7Do not operate this unit
8Do not use force on switches, controls or connection cables. Never pull the cables when disconnecting them.
9Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may result in fire or other acci- dents. YAMAHA will not be held responsible for any damage resulting from the use of this unit with a voltage other than that specified.
10Do not attempt to clean this unit with chemical sol- vents; this might damage the finish. Use a clean, dry cloth.
11Disconnect the power cord from the wall outlet when not planning to use this unit for a long period of time, or during an electrical storm, as they may cause damage by lightning.
12Do not attempt to modify or fix this unit. Contact the qualified YAMAHA service personnel when any ser- vice is needed. Cabinet should never be opened for any reasons.
13Be sure to read ‘TROUBLESHOOTING’ section regarding common operating errors before conclud- ing that this unit is faulty.
NOTE:
Pictures shown maybe different between countries.
Never make or change connections with the power switched on.
When playing DTS encoded CDs, excessive noise will be heard from the analog stereo outputs. To avoid possible damage to the audio sys- tem, the consumer should take proper precautions when the analog stereo outputs of the player are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external
This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device.
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
CAUTIONVISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM (WARNING LOCATION: INSIDE ON LASER COVERSHIELD OR THE BACKPLATE OF SET)
LASERType | Semiconductor laser GaAlAs |
Wave length | 650 nm (DVD) |
| 780 nm (VCD/CD) |
Output Power | 7 mW (DVD) |
| 10 mW (VCD/CD) |
Beam divergence | 60 degree |