Yamaha DVD-S796 Self-diagnosisdisplay function

DVD

No subtitles.	Subtitles appear only with discs which contain them.
	Subtitles are cleared from the TV monitor. Display the subtitles. D J
Alternative soundtrack (or	An alternative language is not selected with discs which do not contain more than one language.
subtitle) languages fail to be	In the case of some discs, the alternative language cannot be selected by operating the [AUDIO] or
selected.	[SUBTITLE]. Try selecting it from the disc’s menu if one is available. B
Angle cannot be changed.	This function is dependent on software availability. Even if a disc has a number of angles recorded,
	these angles may be recorded for specific scenes only (when “ANGLE” lights up on the player’s FL
	display).
Soundtrack and/or subtitle	If the soundtrack and/or subtitle language does not exist on the disc, the language selected at the
language is not the one selected	initial settings will not be seen/heard.
at the initial settings.
The disc’s menu is displayed in	The setup “3 Menus” of “1 Disc Languages” is set to French: select English.
French (example).
Sound does not come from a	Check the connections. 8–=
speaker.	If you have a subwoofer connected to this player, use the On-Screen Menu Icons with the remote
	control to turn subwoofer output on. K
	If you have connected this player to an AV amplifier (with built-in decoder) through the digital audio
	output terminal, go to the initial settings menu “7 Digital Audio Output” and change the settings to
	“Bitstream” for “2 Dolby Digital” or “3 DTS Digital Surround”. P
	Sound will only come from the two main speakers if V.S.S. is on.
	Turn V.S.S. off. E K
The password for rating level has	While stopped, press and hold [:] and [;] on the player and then also press and hold [< OPEN/
been forgotten.	CLOSE] on the player until “Initialized” disappears from the television (after about 3 seconds).
Reset all the settings to Factory	All initial settings will return to the default values.
Preset.
The vocals cannot be turned off.	You have selected an audio channel that includes a vocal channel. Read the disc’s jacket to choose
	the correct channel. C
A menu is shown after playing	Most Karaoke DVDs are designed to do this. Some discs have an item in the menu that allows you
each song on a Karaoke DVD.	to play all the songs.
Video CD
No menu play.	This function works only for Video CDs with playback control. 6

Self-diagnosis display function

When an error or trouble is detected during operation, a message appears in the FL display.

When a message has appeared, check the details given below.

Message	Player status	Remedy
CHECK THE DISC	Disc is dirty.	Wipe the disc clean.
H ¸ ¸	Trouble is likely to have occurred. The	Press [STANDBY/ON] to switch the player to the standby mode
	number following “H” differs depending on	and then back to ON. Alternatively, press [STANDBY/ON] to
¸ ¸ stands
	the status of the player.	switch the player to the standby mode, disconnect the AC power
for a number.
		supply cord, and then reconnect it.

³If the message fails to be cleared, even when remedial action is taken, ask a service technician to repair the player.

For Your Reference

37