Yamaha EMX5016CF 1, 2, 3 4, 5

10 EMX5016CF Owner’s Manual
Quick Guide
Mixer Basics
You can use the reverb effect to simulate the sound of a concert hall or jazz club.
1Turn the EFFECT1 PROGRAM dial to select the desired effect type.
To select a reverb effect, turn the dial to any value from 1 to 5.
2To turn on the effector, set the EFF1 ON switch
to its ON position ( ).
The switch lights up when turned on. As an alternative to the ON
switch, you can use a separately sold FC5 foot switch to toggle the
effector on and off.
3Set the EFF1 RTN fader to the “0” position.
4Use the channel EFF1 knobs to adjust the effect
depth for each channel.
5Use the EFF1 RTN fader to adjust the overall
effect depth.
Note that you can use the PARAMETER knob to adjust the charac-
teristic sound of the selected effect. If you have selected a reverb
effect, the knob adjusts the reverb time.
11
11 HALL 1 5SMALL STAGE 1 99 99 CHORUS CTREMOLO
22
22 ROOM 1 6VOCAL ECHO 00 00 EARLY REF. DSINGLE DELAY
33
33 PLATE 1 7KARAOKE AA AA GATE REVERB EDYNA FILTER
44
44 LARGE STAGE 1 8DELAY BB BB REVERSE GATE FPITCH CHANGE
Adding Some Reverb
EFF1 knobs
PROGRAM dial
EFF1 ON switch
EFF1 RTN fader