Yamaha EMX860ST - page 11

Input/output panel 11

EMX860ST—Owner’s Manual

5AUX IN/TAPE IN jacks

These are input jacks that allow the signal from

an external device to be added to the MAIN out-

put.

•AUX IN jacks: Connect these jacks to the

output jacks of an external effects processor.

If the effects processor has a stereo output,

connect it to the AUX IN L (MONO) and R

jacks. If it has monaural output, use the AUX

IN L (MONO) jack. Signal input to these

jacks is sent to the ST bus.

•TAPE IN jacks: Use these jacks to connect a

stereo device, such as a cassette player or a

CD player. The signals input to these jacks is

sent to the ST bus.

The nominal input level and impedance are –10 dB/

600Ω for the AUX IN jack, and –10 dBV/600Ω

for the TAPE IN jacks.

6REC OUT/MONITOR/MAIN (STEREO)

jacks

These are output jacks which send line level sig-

nals from the EMX860ST to external devices. A

stereo recording device such as a cassette recorder

or MD recorder can be connected to the REC

OUT jacks, and a playback device such a power

amp can be connected to the MONITOR and

MAIN (STEREO) jacks. The signals sent from

each jack are as follows.

•REC OUT jacks: The ST bus signal before it

has passed through the MASTER control

and graphic equalizer

•MONITOR jack: The MONI bus signal

which has passed through the Monitor MAS-

TER control and graphic equalizer

•MAIN (STEREO) jack: The ST bus signal

which has passed through the Main MAS-

TER control and graphic equalizer

The nominal output level and impedance are

–10 dBV/10 kΩ for the REC OUT jacks, and

+4 dB/10 kΩ for the MONITOR/MAIN (STE-

REO) jacks.