22 Specifications
EMX860ST—Owner’s Manual
■Input specifications
■Output specifications
• All output jacks are unbalanced.
• 0 dB=0.775 Vrms, 0 dBV=1 Vrms.
Specifications are subject to change without prior notice.
*1.Sensitivity is the lowest level that can produce an output of +4 dB (1.23 V) or the nominal output level when the unit is set at maximum gain.
(All level controls are at maximum position.)
*2.Balanced.
*3.Unbalanced.
• 0 dB=0.775 Vrms, 0 dBV=1 Vrms.
Input connectors PAD Actual load
impedance Nominal
impedance
Input level Connector
type
Sensitivity*1 Nominal level Max. before
cliping
CH INPUT (Lo-Z)
(CH1–6)
OFF 3 kΩ50–600Ω Mics –62 dB (616 µV) –50 dB (2.45 mV) –20 dB (77.5 mV) XLR-3-31
type*2
ON 600Ω Lines –32 dB (19.5 mV) –20 dB (77.5 mV) +10 dB (2.45 V)
CH INPUT (Hi-Z)
(CH1–6)
OFF 10 kΩ50–600Ω Mics –52 dB (1.95 mV) –40 dB (7.75 mV) –10 dB (245 mV) Phone jack
(TRS)*2
ON 600Ω Lines –22 dB (61.6 mV) –10 dB (245 mV) +20 dB (7.75 V)
MIC INPUT (CH7, 8) 3 kΩ50–600Ω Mics –62 dB (616 µV) –50 dB (2.45 mV) –20 dB (77.5 mV) XLR-3-31 type*2
LINE INPUT (CH7, 8) (L, R) 10 kΩ600Ω Line –22 dB (61.6 mV) –10 dB (245 mV) +20 dB (7.75 V) Phone jack*3
TAPE IN (L, R) 10 kΩ600Ω Line –22 dBV (79.4 mV) –10 dBV (316 mV) +17.8 dBV (7 V) Phono jack
AUX IN (L, R) 10 kΩ600Ω Line –22 dB (61.6 mV) –10 dB (245 mV) +20 dB (7.75 V) Phone jack*3
Output connectors Actual source
impedance Nominal
impedance
Output level Connector type
Nominal Max. before cliping
MAIN AMP OUT (L, R) (A, B) 0.1Ω4/8Ω Speaker 37.7 W/4Ω(200 W/4Ω) Phone jack
MAIN BTL OUT 0.1Ω8Ω Speaker 75.4 W/8Ω(400 W/8Ω) Phone jack
MONITOR AMP OUT (A, B) 0.1Ω8Ω Speaker 37.7 W/4Ω(200 W/4Ω) Phone jack
MAIN OUT (L, R) 600Ω10 kΩ Lines +4 dB (1.23 V) +20 dB (7.75 V) Phone jack
MONITOR OUT 600Ω10 kΩ Lines +4 dB (1.23 V) +20 dB (7.75 V) Phone jack
EFFECT OUT 600Ω10 kΩ Lines +4 dB (1.23 V) +20 dB (7.75 V) Phone jack
REC OUT (1, 2) 600Ω10 kΩ Lines –10 dBV (316 mV) +10 dBV (3.16 V) Phono jack