Quick Guide — Playing the MOTIF ES
Playing the Demo Songs/Patterns
57
Owner’s Manual
There is another way to start Pattern playback – by pressing the
note son the keyboard. Move the cursor to the keyboard icon
and press the [INC/YES] button so that the F mark appears.
In this status, press any key to start the pattern playback.
Press the [DEC/NO] button with the cursor located at the
keyboard icon to turn the F mark off.
Make sure that the [SECTION] lamp is on (press the button if
necessary), then press any of the buttons shown below to
select and play the various Sections contained in a Pattern.
Pressing the [A] - [H] buttons calls up Sections A - H and
pressing the [PRE5] - [PLG3] buttons calls up the Sections I -
P. Try out various rhythm variations by changing the Section.
nSome Sections of the Demo Pattern may have no data. Because of
this, selecting some Sections may result in no sound.
Unlike Song playback, Pattern playback continues in a loop
until the [■] (Stop) button is pressed.
You can stop the Pattern anytime during playback by
pressing the [■] (Stop) button. This pauses the Pattern at the
current position. To resume playback of the Pattern from that
point, press the [F] (Play) again.
To instantly return to the beginning of the Pattern, press the
[] (Top) button.
Selecting a Pattern is done in the same way as selecting a
Song. Refer to step #5 above.
Parameters in the Song Play mode
7Press the [F] (Play) button to start Pattern
playback.
8Select different Sections of the Pattern.
A. PIANO KEYBOARD ORGAN
PRE 5 PRE 6 USER 1
GUITAR/
PLUCKED
SYN LEAD
ABCDEFGHSECTION GROUP
CATEGORY
SEARCH BANK
SYN PAD/
CHOIR SYN COMP
CHROMATIC
PERCUSSION
DRUM/
PERCUSSION
SE MUSICAL FX COMBI
USER 2
STRINGS
PLG 1
BRASS
PLG 2
REED/PIPE
PLG 3
BASS
GM
9Press the [■] (Stop) button to stop Pattern
playback.
10 Select and play another Demo Song.
SEQ TRANSPORT
LOCATE 1 2
SEQ TRANSPORT
LOCATE 1 2
Start Stop
Top button
03 : New Song 1
Song track number and
track mute/solo status
Track data status
Indicates muted track.
Indicates soloed track (page 58).
Indicates that the track has no recorded data.
Indicates a sample track (page 168)
containing a Sample Voice (page 173).
Indicates a MIDI track (page 168) containing
MIDI sequence data.
Location settings for the selected Song
Measure : Beat
(for current playback location)
ARP1-ARP5
Use the [SF1] - [SF5] buttons to call up the
Arpeggio type and Song Scene assigned
to each button (page 123).
Tempo for the selected Song
Time signature for the selected Song
(You can change the value by
moving the cursor here and using the
[INC/YES]/[DEC/NO] buttons and
data dial.)
Transpose setting
(for entire Song)
Currently selected Song
Song number Song name