Playing the Keyboard (in the Performance Play mode)
71
Owner’s Manual
Quick Guide — Playing the MOTIF ES
This calls up a list indicating which Voice is assigned to each
Part of the current Performance.
Move the cursor to the desired Part. When a Voice has
already been assigned to the selected Part, change the Voice
Bank or Number by using the data dial, the [INC/YES] and the
[DEC/NO] button. When no Voice is assigned to the selected
Part, press the [SF1] ADD INT button or [SF2] ADD PLG
button to execute the assignment, then change the Voice
Bank or Number.
You can also select a Voice Bank/Number by using the BANK,
GROUP, and NUMBER buttons (page 60).
nVoices of the Multi part Plug-in Board PLG100-XG cannot be assigned
to Performance parts.
When an internal Voice is assigned to a Part, the following
Voice Banks are available.
When a Plug-in Board Voice is assigned to a Part, the
available Voice Banks differ depending on the installed Plug-
in Board. For details, refer to the Owner’s Manual that came
with the Plug-in Board.
You can set the lowest note of the range over which the Voice
of the selected Part sounds by simultaneously holding the
[SF4] button and pressing the desired key. To set the highest
note of the range, simultaneously hold the [SF5] button and
press the desired key.
Press the [STORE] button to enter the Performance Store
mode, select the destination Performance number, then press
the [ENTER] button to execute the store operation. For details
about Performance Store, see page 91.
1Press the [F2] VOICE button in the Performance
Play mode.
2Assign the desired Voice to each Part.
SCENE SF1 SF2SF3SF4SF5
F1F2F3F4F5F6
INFORMATION
SCENE SF1 SF2SF3SF4SF5
F1F2F3F4F5F6
INFORMATION
DEC/NO INC/YES
Select a Voice
Bank/Number at
the cursor location.
Voice Bank Voice Number
Assign an internal Voice
to the selected Part.
Delete the Voice assignment of the
selected Part.
Assign a Plug-in Voice to the selected Part.
(Available when the Plug-in Board has been installed.)
PRE1 (Preset1) ~
PRE6 (Preset 6) Preset Banks 1 - 6 of the Normal Voice. These
correspond to the [PRE1] - [PRE6] buttons in the Voice
mode.
USER1 ~ USER2 User Banks 1 - 2 of the Normal Voice. These correspond
to the [USER1] - [USER2] buttons in the Voice mode.
GM GM Normal Voice Bank. This corresponds to the [GM]
button in the Voice mode.
PDR (Preset Drum) Preset Bank of the Drum Voice. This corresponds to
pressing the [DRUM KITS] button and the [PRE5] button
simultaneously.
GMDR (GM Drum) GM Drum Voice Bank. This corresponds to pressing the
[DRUM KITS] button and the [GM] button simultaneously.
UDR (User Drum) User Bank of the Drum Voice. This corresponds to
pressing the [DRUM KITS] button and the [USER1]
button simultaneously.
3Specify the note range of each part, as required.
4Change the volume of each Part and adjust the
relative balance among the four Parts by using
the Control sliders.
5Store the settings as a User Performance in the
Performance Store mode.
SF 4 SF 5
Note Limit Low Note Limit High