Editing a Voice
81
Owner’s Manual
Quick Guide — Advanced Course
Editing a Voice by using the Knobs
The four knobs at the top left of the instrument are not only for tweaking the sound while you perform — you can also use
them to edit a Voice, either in the Voice Play mode or the Voice Edit mode.
●When the [PAN/SEND] indicator is turned on:
●When the [TONE] indicator is turned on:
nThe settings above are applied as offsets to the AEG and FEG settings in the Voice Edit mode.
●When the [ARP FX] indicator is turned on:
●When the [EQ] indicator is turned on:
nThe settings above are applied as offsets to the EQ settings in the [VOICE] → [UTILITY] → [F3] VOICE → [SF1] MEQ display.
●When both the [PAN/SEND] and [TONE] indicators are turned on (by pressing them simultaneously):
nIn addition to above functions, Master Effect related parameters (set in the [UTILITY] → [F3] VOICE → [SF2] MEF display) can be assigned to
these four knobs by pressing the [ARP FX] and [EQ] buttons simultaneously. The particular parameters assigned to the four knobs can be set in the
[UTILITY] → [F4] CTL ASN → [SF5] MEF display.
Editing a Voice by using the Control Sliders (CS)
In the Voice mode, the four Control Sliders let you independently adjust the levels of the Elements of a Normal Voice or the
Drum Voice keys. When a Normal Voice is selected, you can adjust the level balance among the four Elements.
nInadvertent use of the sliders may result in no sound. If this occurs, move the sliders upward.
PAN Determines the stereo pan position of the Voice. [VOICE] → Voice selection → [EDIT] → [COMMON] →
[F2] OUTPUT → Pan
Page 190
REVERB Determines the amount of Reverb effect that is applied to the Voice. [VOICE] → Voice selection → [EDIT] → [COMMON] →
[F2] OUTPUT → RevSend
Page 191
CHORUS Determines the amount of Chorus effect that is applied to the Voice. [VOICE] → Voice selection → [EDIT] → [COMMON] →
[F2] OUTPUT → ChoSend
Page 191
TEMPO
Determines the tempo of the Arpeggio assigned to the currently selected Voice.
[VOICE] → Voice selection → [F6] ARP → Tempo Page 189
CUTOFF Raises or lowers the Filter cutoff frequency to adjust the tone brilliance. [VOICE] → Voice selection → [F5] EG → CUTOF Page 189
RESONANCE Boosts or attenuates the level at the area around the Filter cutoff
frequency.
[VOICE] → Voice selection → [F5] EG → RESO Page 189
ATTACK Determines the attack time of the sound. For example, you can adjust a
strings Voice so that the sound gradually swells in volume by setting a
slow attack time – simply turn this knob to the right.
[VOICE] → Voice selection → [F5] EG → ATK (AEG) Page 189
RELEASE Determines the release time of the sound. Turning the knob to the right
sets a long release time and (depending on the selected Voice) lets the
sound sustain after the key is released. To produce a sharp release, in
which the sound abruptly cuts off, set a short release time.
[VOICE] → Voice selection → [F5] EG → REL (AEG) Page 189
SWING Adjusts the swing feel of the Arpeggio playback. [VOICE] → Voice selection → [EDIT] → [COMMON] →
[F3] ARP → [SF3] PLAY FX → Swing
Page 192
GATE TIME Adjusts the Gate Time (length) of the Arpeggio notes. [VOICE] → Voice selection → [EDIT] → [COMMON] →
[F3] ARP → [SF3] PLAY FX → GateTimeRate
Page 192
VELOCITY Adjusts the velocity of the Arpeggio notes. [VOICE] → Voice selection → [EDIT] → [COMMON] →
[F3] ARP → [SF3] PLAY FX → VelocityRate
Page 192
UNITMULTIPLY Adjusts the Arpeggio playback time based on tempo. [VOICE] → Voice selection → [EDIT] → [COMMON] →
[F3] ARP → [SF3] PLAY FX → UnitMultiply
Page 192
LO Determines the amount of boost or attenuation applied to the low
frequency band of the Master EQ.
[VOICE] → Voice selection → [EDIT] → [COMMON] →
[F1] GENERAL → [SF3] MEQ OFS → LOW
Page 190
LO MID Determines the amount of boost or attenuation applied to the low-
midrange frequency band of the Master EQ.
[VOICE] → Voice selection → [EDIT] → [COMMON] →
[F1] GENERAL → [SF3] MEQ OFS → LOW MID
Page 190
HI MID Determines the amount of boost or attenuation applied to the high-
midrange frequency band of the Master EQ.
[VOICE] → Voice selection → [EDIT] → [COMMON] →
[F1] GENERAL → [SF3] MEQ OFS → HIGH MID
Page 190
HI Determines the amount of boost or attenuation applied to the high
frequency band of the Master EQ.
[VOICE] → Voice selection → [EDIT] → [COMMON] →
[F1] GENERAL → [SF3] MEQ OFS → HIGH
Page 190
ASSIGN A Adjusts parameters assigned to these knobs in the [UTILITY] → [F4] CTL ASN → [SF2] ASSIGN display. Page 263
ASSIGN B
ASSIGN 1 Adjusts parameters assigned to these knobs in the [VOICE] → Voice selection → [EDIT] → [COMMON] → [F4] CTL SET display. Page 192
ASSIGN 2
[VOICE] → Voice selection → [EDIT] → Element selection → [F4] AMP → [SF1] LVL/PAN → Level
TIP
TIP