154
Voice Mode
Zone Graphical Display
On the left side of this screen, the zone (keyboard
and velocity range at which sound will be produced)
is displayed. The note range is indicated by the
horizontal axis, while the velocity note range is
indicated by the vertical axis. As each parameter
value is adjusted, the shape of the black box, which
represents the note range, changes accordingly.
When you switch to a different layer, that layer’s
zone is displayed in the Zone Graphical Display. It is
not possible to view more than one zone at the same
time.
127
1
75
C4C–2 G8
Velocity
Note
Range
Note Range
Wave Job Mode
When in the Wave Edit mode, press [JOB] to enter
Wave Job mode. These jobs let you copy and delete
waves that were created in Wave Edit mode.
When you enter the Wave Job mode, the following
menu will be displayed. There are two types of jobs in
Wave Job mode, Copy wave and Delete wave. Press [F1]
(COPY) or [F2] (DEL) to select a job.
[F1]: COPY (Copy wave)
[F2]: DEL (Delete wave)
Steps for Executing a Job
1When in the Wave Edit mode, press [JOB] to enter
the Wave Job mode.
2Press [F1] (COPY) or [F2] (DEL), to select a job to
execute. The selected job screen will be displayed.
You can also select each job by moving the cursor to the
desired job name on the screen and pressing [ENTER].
3Move the cursor to a parameter and use the
[INC]/[DEC], Data Dial, numeric keypad, or the
Knobs 1~6 to set values.
4Press [ENTER]. The following pop-up menu will
appear, prompting confirmation of the operation.
F1 F2
Voice/E.qx 5/21/98 11:31 AM Page 154