66
Insertion Effects
Two insertion effect units are provided in addition to the Reverb and Chorus system effect units
described above. The Effect 1 unit includes 24 effects including chorus, distortion and overdrive, amp
simulation, auto wah, equalization and more. The Effect 2 unit adds a range delay, reverb, and other
effects, providing a total of 79 effects. In the Voice mode the insertion effects can be individually
applied to each voice, and can be individually turned on or off for each element within the voice. In
the Performance mode the insertion effects programmed for each voice within the performance setup
can be turned on or off as required.
See the Data List book for a complete list of the available insertion effects.
Effects In the Voice Mode
In the Voice mode, independent effect types and parameter settings can be programmed for each effect
unit (Reverb, Chorus, Insertion Effect) and stored with each voice. Furthermore, the two insertion
effects can be independently turned on or off for each voice element. It is also possible to specify the
insertion effect connection mode (series or parallel), and specify the order of the effect units when
series connection is used. The combined signal from all voice elements — after application of the
insertion effects — is applied to the Reverb and Chorus system effect units.
Voice mode effect assignment details on page 105.
Insertion Effects
Elements 1~4
EF1: EF2 EF1→EF2
21
EF2→EF1
12
Connections
1
2
1
2
OFF
Chorus
Reverb
Currently selected effect type
Introductory
Section
Basic/E/qx 5/21/98 11:22 AM Page 66