Yamaha EZ-200 - page 33

EZ-200 Owner’s Manual 33
Song settings
Changing the Melody Voice
You can change a Song’s melody Voice to any other Voice you prefer.
1Select the Song and play it.
Refer to the section “Playing the Songs” on page 12.
2Select the voice.
Press the [VOICE] button, and then select a desired Voice by using the
number buttons [0]–[9], [+], [-].
The selected Voice sounds when you play the keyboard.
If a Song has played through and stopped during this procedure, press
the [START/STOP] button to start playback again.
3Press and hold the [VOICE] button for longer than a sec-
ond.
“SONG MELODY VOICE” appears in the display for a few seconds,
indicating that the Voice selected in Step 2 has replaced the Song’s
original melody Voice.
Song Volume
This procedure allows you to adjust the balance between Song playback
and the notes you play on the keyboard by setting the volume of the play-
back sound.
1Press the [SONG] button.
003
BritePno
001
Hold for longer than a second.