22 Specifications
—Owner’s Manual
Input specificationsOutput specificationsSpecifications are subject to change without prior notice.
For European Model
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 3A
Conformed Environment: E1, E2, E3 and E4
†1. Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V) or the nominal output level when the unit is set at maximum
gain. (All faders and level controls are at maximum positions.)
†2. Balanced.
†3. Unbalanced.
• When dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms, 0 dBV is referenced to 1 Vrms.
†1. Balanced.
†2. Unbalanced.
• When dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms, 0 dBV is referenced 1 Vrms.
Input terminals Gain
trim Actual load
impedance For use with
nominal
Input level
Connector
Sensitivity†1Nominal Max. before clip
INPUT A, B
(1–20, 1–12, 1–8)
MAX 3 kΩ50–600Ω Mics
&
600Ω Lines
–86 dB (38.8 µV) –60 dB (0.775 mV) –40 dB (7.75 mV) A: XLR-3-31 type†2
B: Phone jack†2
MIN –42 dB (6.16 mV) –16 dB (123 mV) +4 dB (1.23 V)
ST INPUT A, B
(21–24, 13–16, 9–12)
MAX
10 kΩ600Ω Lines
–60 dB (0.775 mV) –34 dB (15.5 mV) –14 dB (155 mV) A: Phono jack†3
B: Phone jack†3
MIN –16 dB (123 mV) +10 dB (2.45 V) +30 dB (24.5 V)
AUX RTN IN (1, 2) –12 dB (195 mV) +4 dB (1.23 V) +20 dB (7.75 V) Phone jack†3
TAPE IN (L, R) –26 dBV (50.1 mV) –10 dBV (316 mV) +8 dBV (2.51 V) Phono jack†3
CH INSERT IN
(1–20, 1–12, 1–8) –26 dB (38.8 mV) 0 dB (775 mV) +20 dB (7.75 V) Phone jack (I/O)†3
ST INSERT IN (L, R) –10 dB (245 mV)
Output terminals Actual source
impedance For use with
nominal
Output level
Connector
Nominal Max. before clip
ST OUT (L, R) 150Ω
600Ω Lines +4 dB (1.23 V)
+24 dB (12.3 V) XLR-3-32 type†1
MONO OUT
GROUP OUT (1–4) 75Ω+20 dB (7.75 V) Phone jack†2
AUX OUT (1–6) 150Ω+24 dB (12.3 V) Phone jack†1
C-R OUT (L, R) 75Ω+20 dB (7.75 V) Phone jack†2
REC OUT (L, R)
600Ω10 kΩ Lines
–10 dBV (316 mV) +10 dBV (3.16 V) Phono jack†2
CH INSERT OUT
(1–20, 1–12, 1–8) 0 dB (775 mV) +20 dB (7.75 V) Phone jack (I/O)†2
ST INSERT OUT (L, R)
PHONES OUT 100Ω40Ω Phones 3 mW 100 mW ST phone jack†2