28 EFFECT SECTION
GUIDED TOUR (TUTORIAL)
8. Use the five switches just below the LCD
(labeled CMP, DST, EQ, CHO and REV) to
select the order of the corresponding effects.
Note: Compressor, Distortion and Equalizer can only be
selected for the first three effects, while Chorus and
Reverb/Delay are always the last two.
For example, to put the Distortion first in the
chain, press [DST].
Next, press [CMP] to select Compressor for
the second effect.
Equalizer (EQ) is automatically selected for
the third effect, since the last two are re-
served for Chorus and Reverb/Delay.
Finally, select the fourth effect in the chain.
Press [CHO].
Distortion
Compressor Equalizer Reverb/Delay
Chorus