Editing and titling an MD
m Divide | m Disc Maintenance |
This function lets you divide one track into two separate tracks by adding a new track number to a certain point in the track.
Example: Dividing track 3
1 | 2 | 3 |
| 4 |
| 5 | 6 |
|
Before | A | B | C |
| D |
| E |
|
dividing |
|
|
|
The MD recorder features two disc maintenance functions which optimize performance of MDs. The TOC Write function allows you to write the result of editing to the TOC without having to eject the disc. The FRA Check function recovers recordable space on a disc that may have been lost because of repeated editing operations.
After | 1 | 2 | 3 |
| 4 |
| 5 | 6 |
|
|
| A | B |
| C1 |
| 4 | D |
|
| |
dividing |
|
|
| C2 |
|
| ||||
1 Play the track you want to divide. |
|
|
|
| ||||||
2 Use | or | to locate the point where you want to | ||||||||
divide the track, then press | (or |
| on the remote | |||||||
| ||||||||||
| ||||||||||
control) to pause at that position. |
|
|
|
| ||||||
3 Press MD EDIT repeatedly to display “(track number) Divide ?”, then press ENTER.
*“Check” appears momentarily, then “Divide OK ?” appears and the MD recorder starts repeating the point where the track will be divided.
4 If necessary, use the jog dial to adjust the position of the point where the track will be divided.
*The dividing position can be adjusted up to 2 second in either direction.
5 Press ENTER.
*The track is divided and “Complete” appears momentarily.
*If the divided track originally had a track title, the same title remains on both of the two divided.
mTo undo the editing
The Undo function lets you immediately return to the condition before an editing is made (note; you cannot undo the editing once you press any other button).
1 Press 
to stop the MD recorder.
2 Press MD EDIT repeatedly to display “Undo 
*1”, then
press ENTER.
* “Undo OK ?” appears on the display. To cancel undoing,
TOC Write
When making a recording, the TOC (Table Of Contents) of the MD is written as soon as recording is finished. When making an editing or titling operation, however, the TOC isn’t automatically written unless the disc is ejected. If the MD recorder is accidentally turned off before writing the result of editing to the TOC, it is possible that these changes will not be saved. By using this function, you can ensure that the result of your edition is saved on the disc.
1 Press 
to stop the MD recorder.
2 Press MD EDIT repeatedly to display “TOC Write ?”, then press ENTER.
* “TOC WriteOK?” appears on the display.
3 Press ENTER.
* “TOC Writing” flashes on the display momentarily.
Notes
•You cannot undo the result of editing once it has been written to the TOC.
•The TOC Write function can only be selected when the TOC indicator is lit on the display.
FRA Check
When editing operations such as “Move” and “Divide” are performed, recordable space may be lost and “TOC Full” may appear on the display to indicate that no more recording can be performed. When this occurs, it may be possible to recover the FRA (Freely Recordable Area) on the disc that was lost by repeated editing operations so that more recording is possible.
1 Press 
to stop the MD recorder.
2 Press MD EDIT repeatedly to display “FRA Check ?”, then press ENTER.
* “FRA CheckOK?” appears on the display.
|
| press . | 3 Press ENTER. |
3 Press ENTER again to undo. | * “Complete” appears momentarily. | ||
| |||
|
| *1: The name of editing you can undo is displayed here. |
|
|
|
| |
mTo cancel the editing
Press 
.
37