Preparations and connections

(1)

ANTENNA

FM GND AM

75Ω UNBAL.

ANTENNA

FM GND AM

75Ω UNBAL.

DIGITAL OUT

OPTICAL

(U.S.A. model)

(2)

mAntenna connection

(1) Supplied FM antenna

Connect the FM antenna wire to the corresponding terminal and direct the FM antenna wire to the direction where the strongest signal can be received.

(2) Supplied AM loop antenna

Connect the AM loop antenna wires to the corresponding terminals. Position the AM loop antenna for optimum reception.

Notes

cWhen static is still heard even after adjusting the position of the AM loop antenna, try reversing the wire connections (from the right terminal to the left one, and vice versa).

cThe AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall.

Using an external antenna

cUse an external FM antenna instead of an indoor FM antenna if you need better reception. Consult your dealer.

cUse an external AM antenna if you need better reception. Consult your dealer.

ANTENNA

FM GND AM

75Ω UNBAL.

ANTENNA

FM GND AM

75Ω UNBAL.

DIGITAL OUT

OPTICAL

MD recorder, etc.

DIGITAL IN

SUBWOOFER

OUT

OUT IN

AUX/MD

R L

OUT

IN

R

L

6 Ω MIN./

SEE OWNE

FOR CONN

mConnecting an external component

This system can be connected with an external audio component. Make connections between this system and the component using RCA pin plug connector cables correctly, that is to say L (left) to L and R (right) to R. Also, refer to the owner’s manual for the component to be connected to this system.

*A digital-to-digital recording is possible from a CD played on the built-in CD player to an MD (or tape) on an external MD recorder (or DAT) by connecting the DIGITAL OUT (OPTICAL) terminal on the rear of the main unit to the MD recorder (or DAT).

FRONT

SPEAKERS

(U.S.A. model)

E-6