English
12 HS80M/HS50M/HS10W Owner’s Manual

Rear Panel

HS80M, HS50M

1POWER switch
Turns power to the speaker on or off. When the power is
turned on the tuning fork mark on the front panel will light.
"LEVEL control
Adjusts the overall output level.
#INPUT 1/2 connector
These are balanced XLR-type and phone type input
connectors.
Do NOT use both the XLR and Phone type connector at the same
time. Please connect to only one of these connectors.
$MID EQ switch
Adjusts the level of the mid-frequency range. Setting the
switch to the “0” position produces a flat frequency response.
With the “+2 dB” setting, the mid range is boosted by 2 dB.
With the “-2 dB” setting, the mid range is cut by -2 dB.
(Center frequency is 2 kHz.)
%ROOM CONTROL switch
Corrects the low frequency exaggeration caused by reflecting
off ceilings, walls and floors. Setting the switch to the “0”
position produces a flat frequency response. With the “-2 dB”
setting, the range below 500 Hz is cut by 2 dB. With the “-4
dB” setting, the range below 500 Hz is cut by -4 dB.
&HIGH TRIM switch
Adjusts the level of high-frequency range.
HS50M: Setting the switch to the “0” position produces a flat
frequency response.
With the “+2 dB” setting, the range above 3 kHz is
boosted by 2 dB. With the “-2 dB” setting, the
range above 3 kHz is cut by -2 dB.
HS80M: Setting the switch to the “0” position produces a flat
frequency response.
With the “+2 dB” setting, the range above 2 kHz is
boosted by 2 dB. With the “-2 dB” setting, the
range above 2 kHz is cut by -2 dB.
'LOW CUT switch
Cuts the low-frequency range. With the “80 Hz” setting the
range below 80 Hz is cut. With the “100 Hz” setting the range
below 100 Hz is cut.
(AC IN Connector
Connect the supplied power cable here. First connect the
power cord to the speaker, then insert the power cord plug
into the AC outlet.
ROOM CONTROL
HIGH TRIM
+2dB
+2dB
0dB
0dB
-2dB
-2dB
0dB
-2dB
-4dB +2dB
0
-2dB
0
-2dB
-4dB
+2dB
0
-2dB
-10dB
+4dB
1
2
MID EQ
ROOM
CONTROL
HIGH
TRIM
LOW CUT
FLAT
80Hz
100Hz
MID EQ
LOW CUT
OFF
INPUT
LEVEL
POWER
ON
AC IN
2kHz
3kHz
500Hz
100Hz
80Hz
FLAT
MIN
+2dB
+2dB
0dB
0dB
-2dB
-2dB
0dB
-2dB
-4dB
2kHz
2kHz
500Hz
100Hz
FLAT
80Hz
ROOM CONTROL
HIGH TRIM
MID EQ
LOW CUT
HS50MHS80M

!

"

#

$

%

&

'

(