BASIC OPERATION
PLAYING A SOURCE
When using the remote control, press AMP(TUNER) on | 4 Select the desired input | |||
the component selector. |
|
| source with INPUT (or the | |
|
|
| input selector buttons). | |
2 | 4 | 1,6 | (Turn on the TV monitor for | |
video sources.) | ||||
|
|
| ||
|
|
| The name of the selected input | |
|
|
| source appears on the display. | |
– | + | – | + |
Front panel
or
Remote control
3 | 7 | 6 |
|
| 6 |
| 2 |
|
| 4 | 7 |
|
|
1 Set VOLUME to the “ m” position.
Front panel
2Turn the power on.
or
Front panel | Remote control |
Input source
a.To select a tape or an MD source
Press TAPE/MD MON / EXT. |
|
DECODER (or TAPE/MD) so |
|
that the “TAPE/MD | Front panel |
MONITOR” indicator lights up |
|
on the display. |
|
b.To select a source connected to the EXTERNAL DECODER INPUT terminals
Press TAPE/MD MON / EXT. DECODER repeatedly (or EXT. DEC.) until “EXT. DECODER” appears on the display.
Notes
•An audio source can not be played if the “TAPE/MD MONITOR” indicator lights up or if “EXT. DECODER” appears. Press TAPE/ MD MON / EXT. DECODER twice (or TAPE/MD once) to turn off the “TAPE/MD MONITOR” indicator. Press TAPE/MD MON / EXT. DECODER once (or EXT. DEC.) to turn off “EXT. DECODER”.
•If you select and play a video source when the “TAPE/MD MONITOR” indicator lights up or “EXT. DECODER” appears, the play back result will be a video image from the video source and the sound from the audio source selected by using TAPE/MD MON / EXT. DECODER (or TAPE/MD or EXT. DEC.).
OPERATION BASIC
3 Press SPEAKERS A or B |
| y | |
to select the main |
| For the DVD/LD, TV/digital TV and satellite tuner sources, the | |
| current input mode is also shown. Refer to page 21 for details about | ||
speakers to be used. |
| ||
Front panel | the input mode. | ||
If you use two main speaker | |||
| |||
|
|
systems, press both A and B.
English
19