Yamaha HTR-5630RDS Set Menu, Set menu list, Adjusting the items on the set menu, 2,4,7 3,5,6

SET MENU

You can set the following parameters on the set menu to obtain a better sound from the unit. Change the settings to reflect the needs of your listening environment.

Set menu list

The set menus are divided by use and function into the 4 categories listed here.

■BASIC

The BASIC area contains the basic parameters that you must set before using this unit. It consists of the following menus. See pages 18 – 20 for a detailed explanation.

1SETUP

2SP LEVEL (Speaker level)

■SOUND

The SOUND area contains parameters for altering sound output. It consists of the following menus that you can use to alter the quality and tone of the sound output by the system.

1	SPEAKER SET
2	SP DISTANCE (Speaker distance)
3	LFE LEVEL (Low frequency effect level)
4	D. RANGE (Dynamic range)

Adjusting the items on the set

menu

Use the remote control to make adjustments.

PROG		PROG
	MUTE
LEVEL	VOLUME	SET MENU	1

2,4,7 3,5,6

y

•You can change set menu parameters while the unit is reproducing sound.

•You can use NEXT and SET MENU +/– on the front panel to change these settings, if the unit is not set to TUNER mode. Press NEXT to select the category or field you wish to change, and SET MENU +/– to change the parameters.

Note

•You cannot change some set menu parameters while the unit is in night listening mode.

1 Press SET MENU to enter

5	CENTER GEQ (Center graphic equalizer)
6	HP TONE CTRL (Headphone tone control)

the set menu.

SET MENU

■INPUT

The INPUT area contains parameters concerned with signal input. It consists of the following menus that you can use to change the assignment of input jacks.

1I/O ASSIGN

2INPUT MODE

■OPTION

This is a supplementary set up menu provided for your convenience. It consists of the following menus that you can use to change display brightness, protect existing settings, and perform other non-essential functions.

1DISPLAY SET

2MEM. GUARD

3AUDIO MUTE

•In the descriptions for each item from the following page, the default setting is indicated in bold.

2 Press u / d repeatedly to select the desired menu.

3 Press –/+ to enter the selected menu.

4 Press u / d repeatedly to select the item you want to adjust.

y

•By pressing SET MENU repeatedly, you can select items in the same order as when pressing d.

English

39