DOLBY NR selector setting (in step 2)

Be sure to set the DOLBY NR selector according to the system used for recording.

OFF: For a tape recorded with DOLBY NR OFF. B: For a tape recorded with DOLBY B NR.

C: For a tape recorded with DOLBY C NR.

REVERSE MODE selector setting (in step 3)

The auto reverse function allows the tape running direction be reversed automatically. Select an auto reverse mode

( ,, or RELAY ) or manual reverse mode ().

: When playback or fast forwarding (or rewinding) of one side of a tape is finished, the deck stops at the end of the tape.

:Both sides of the tape are played back. After playing, the deck stops at the end of the tape. (When the tape running direction is set to ¤, only the reverse side is played.) When the tape is fast rewound to the beginning of the reverse side, playback automatically starts from the same side. When the tape is fast forwarded to the end of the forward side, playback automatically starts from the reverse side.

: Both sides of the tape are repeatedly played back (up to 8 times).

When the tape is fast forwarded or rewound to the beginning or the end of a side, playback automatically starts from the same side or the other side respectively.

RELAY : Cassette tapes loaded in DECKs A and B are played back sequentially. (See “RELAY PLAYBACK” on page 9.)

ENGLISH

Display during playback

 

Tape running direction

 

Tape running direction

 

 

 

indicator (DECK A)

 

indicator (DECK B)

 

 

Tape counter

 

 

 

 

 

 

 

Tape counter

 

 

 

¤A ‹

 

 

RELAY

¤B ‹

 

 

 

 

 

DUB

 

NORM HIGH

B C REC

 

 

 

L

 

 

 

 

 

 

 

 

 

6 +

– 30 dB 20

15

10

8

6

4

2

0

2

4

R

Peak level meters

Indicate the peaks of the signal levels during recording and playback over a –30 dB to +6 dB range. There are separate meters for each left and right channel. These level meters have a peak hold function which holds the peak level for about 1.5 seconds.

To adjust the volume level

Note

Use the volume control of the amplifier or receiver.

Never press the EJECT button during playback.

To use headphones

 

Insert the headphones plug into the PHONES jack. Since

 

the sound is also heard from the speakers, operate the

 

amplifier to cut off the sound from the speakers for private

 

listening.

 

7