RESET ! ⁄
s
MUTE/SEARCH
DECK A | DECK B |
SELECTION SEARCH - To play back a desired selection by searching for the beginning of the selection
To search for the next selection
When the #tape running indicator is lit:
⁄MUTE/SEARCH
+ 
Press simultaneously.
When the @tape running indicator is lit:
!MUTE/SEARCH
+ 
Press simultaneously.
To search for the beginning of the current selection When the #tape running indicator is lit:
!MUTE/SEARCH
+ 
Press simultaneously.
When the @tape running indicator is lit:
⁄MUTE/SEARCH
+ 
Press simultaneously.
To search for the selection located before the current selection
÷Operate the following buttons when the beginning of the current selection is being played.
When the #tape running indicator is lit: | When the @tape running indicator is lit: | ||
! | MUTE/SEARCH | ⁄ | MUTE/SEARCH |
+ |
| + | |
Press |
|
| Press |
simultaneously. |
| simultaneously. | |
Notes
÷The blank interval between selections must be at least 4 seconds long.
÷Selection search may not operate properly with tapes recorded at a low recording level or which have excessive noise.
÷Use the tape counter to aid in locating a point on a tape (0000 to 9999). To set the counter reading to “0000”, press the RESET button.
8