Basic components

EMU26700

Clock

Press the “” (mode) button repeatedly until the indicator on the face of the gauge

points to “” (time). To set the clock, be

sure the gauge is in the “” (time) mode. Press the “” (set) button; the hour display

will begin blinking. Press the “” (mode) button until the desired hour is displayed. Press the “” (set) button again, the minute

display will begin blinking. Press the “” (mode) button until the desired minute is dis- played. Press the “” (set) button again to start the clock.

NOTE:

The fuel level reading can be affected by the position of the sensor in the fuel tank and the attitude of the boat in the water. Operation with bow-up trim or continuous turning can give false readings.

NOTE:

The clock operates on battery power. Disconnecting the battery will stop the clock. Reset the clock after connecting the battery.

EMU26710

Fuel gauge

The fuel level is indicated by eight segments. When all segments are showing, the fuel tank is full.

ECM00860

CAUTION:

The Yamaha fuel tank sensor differs from conventional sensors. Incorrectly setting the selector switch on the gauge will give false readings. Consult your Yamaha dealer on how to correctly set the selector switch.

ZMU01745

EMU26720

Fuel warning indicator

If the fuel level decreases to one segment, the fuel level warning segment will begin to blink.

ECM00880

CAUTION:

Do not continue to operate the engine with full throttle if a warning device has activat- ed. Get back to the port within trolling engine speed.

1. Fuel level warning segment

EMU26730

Low battery voltage warning indicator

If battery voltage drops, the display will automatically turn on and begin to blink.

20