Adjusting trolling engine speed

Adjusting trolling engine speed

Adjust the trolling engine speed using “TROLL” on the main screen. You can adjust designated trolling speed in units of 50 r/min. The trolling engine speed is synchronized for all engines in a multi-engine configuration. You can switch to trolling mode when all the following conditions are satisfied:

Conditions for changing to trolling mode

•When the engine is running.

•When the throttle lever is in the fully closed position.

•When the gear shift is in the N position.

•When “TROLL” is selected on the main screen.

SET

CANCEL

MENU

1.Select “TROLL” on the main screen. Press the “SET” button to switch to trolling mode.

“VIEW” on the status bar will switch to “TROLL.”

SET

CANCEL

MENU

SET

CANCEL

MENU

2.Set the gear shift in the F or R position, and then use the “LI” (Up/Down) but- tons of the directional keypad to adjust the designated trolling engine speed.

(The parameters within which the engine speed can be adjusted depend on the outboard motor.)

25