Yamaha MLA8 Connection Example

ENGLISH

6MIC LINE AMPLIFIER

Rear Panel

8 AC IN connector

Connect the included power cord here. First, connect the

power cord to the MLA8, then insert the power cord plug

into the AC outlet.

Be sure to use the included power cord.

Use of other cords may result in

malfunction, heat generation, or ﬁre.

9 INPUT 1–8 connectors

These balanced XLR-3-31-type connectors are used to

input analog signals to the corresponding channels.

) OUTPUT connectors

There are two types of balanced output connectors:

Euroblock connectors and D-sub 25-pin connector.

●Euroblock connectors

The device has four Euroblock connectors with six pins.

These dual channel connectors consist of three pins:

hot, cold, ground on each channel. The supplied

Euroblock plugs should be wired as shown. Tighten the

screws to secure the wires.

●D-sub 25pin connector

Using the optional I/O card (MY8-AD96), you can

connect to the Yamaha DM2000 Digital Mixer.

Connection Example

Connecting to the DM2000

You can connect the device to Yamaha digital audio

equipment using the D-sub 25-pin connector.

For connection to the DM2000, you will need the optional

I/O card (MY8-AD96).

1234

5678

INPUT

123

4567

ANALOG

OUTPUT

+4dBu

OUTPUT +4dBu

AC IN

)

9

8

+–

OUT PUT

D-sub 25-pin cable

Optional I/O card MY8-AD96

Digital mixer DM2000

MLA8