5
ENGLISH
Front Panel / Rear Panel
1STANDBY/ON switch/indicator
Press this switch to switch the power between
STANDBY and ON. When the power is turned on, the
STANDBY/ON indicator comes on.
2LOW control
Turn this control clockwise to boost low frequencies
and counterclockwise to reduce them.
3HIGH control
Turn this control clockwise to boost high frequencies
and counterclockwise to reduce them.
4VOLUME control
Use this control to set the volume level.
5MIC INPUT
A dynamic type microphone can be connected to this
1/4 inch phone jack.
6Line 1 Input
The line level output from a CD player or VCR can be
connected to this RCA pin jack.
7Line 2 Input
Any audio equipment that produces a line level output
can be connected to this 1/4 inch phone jack, i.e., syn-
thesizer, mixer, multitrack recorder, effects unit, etc.
8Line Out
A multitrack recorder can be connected to this 1/4 inch
phone jack for recording. Input signals from the Mic,
Line 1, and Line 2 inputs are mixed, then output here.
Another MS101III can be connected to this jack for par-
allel operation. The front panel volume knob doesn’t
effect the volume level of this line out.
STANDBY/ON LOW
-10 +10
HIGH
-10 +10
VOLUME
MONITOR SPEAKER MS1013
MIC
INPUT
MIN MAX
INPUT
LINE 1 LINE 2
LINE OUT
12345
6
7
8
CAUTION:
A small amount of electric current is flowing even when the
power is in the STANDBY mode. When not using the MS101III
for an extended period of time, be sure to discon-nect the
power cord from the AC outlet.