104
UTILITY MODE
Drum (DrumInit)
Setting: DrumS1, DrumS2
This restores the original drum settings for the selected Drum
SetupS1, SetupS2. (Use the VALUE q buttons to select the
desired Drum Setup.)
When C/M or DOC is selected, only DrumS1 can be selected.
NOTE
This parameter is not available when the MU50 is set to Performance mode.
3From the “Are you sure?” prompt, press the ENTER ENTER
ENTER ENTER
ENTER button to ex-
ecute the operation, or press the EXIT EXIT
EXIT EXIT
EXIT button to cancel it and re-
turn to the previous display.
An “Executing…” message appears in the display during the op-
eration. When the operation is completed, the MU50 returns to
the Initialize menu.
Demo Song Play (DEMO)
The Demo Song function in the Utility menu allows you to play the built-
in Demo Song.
Operation
1
Press the UTILUTIL
UTILUTIL
UTIL button and select “DEMO” using the SELECTSELECT
SELECTSELECT
SELECT
w
buttons, then press the ENTERENTER
ENTERENTER
ENTER button.
2Press the ENTERENTER
ENTERENTER
ENTER button to start the Demo Song.