14
GUIDED TOUR
Powering Up and Playing the Demo Song
Once you’ve connected everything properly, you’re ready to turn the MU50
on and start playing it. However, a small word of caution before you begin:
Follow the instructions given below to avoid possible damage to your
equipment and speakers.
Powering Up
Operation
1If you haven’t done so already, press the POWER/VOLPOWER/VOL
POWER/VOLPOWER/VOL
POWER/VOL control
on the MU50.
After the greeting display, the following display will appear:
2Turn on the power of your MIDI keyboard.
3Make sure that all volume controls (on the MU50 and the con-
nected amplifier) are turned down. Then, turn on the power of
your amplifier speaker system.
4Finally, set the volume control on the MU50 to about the mid-
way position and set the volume on the amplifier to a suitable
level.