Yamaha MU50 - page 26

GUIDED TOUR
17
Selecting Voices
In this brief section, you’ll learn how to select other Voices. You can do this
directly from the panel of the MU50 or remotely, from your MIDI key-
board.
Operation
1First, select a Part. Use the PARTPART
PARTPART
PART q buttons to select Part 1.
Press the appropriate button until “01” appears in the PART sec-
tion of the display.
2Use the SELECT SELECT
SELECT SELECT
SELECT w buttons to move the arrow cursor to the
right side of the instrument icon, as shown below.
3Use the VALUEVALUE
VALUEVALUE
VALUE q buttons to change the Voice number. In
the display below, Voice number 26 has been selected.
Voice name. Voice number (program number).
Instrument icon of current Voice.
MIDI receive channel for current Part.
Part number. (This is selectable only with the PARTPART
PARTPART
PART q buttons.)
Solid arrow at Voice number (currently selected).
Arrow cursor (indicates currently selected control).
The arrow is directly above “PGM#” on the panel,
indicating that Program Number is currently selected.
Use these to move arrow cursor.