22
GUIDED TOUR
Changing the Volume and Pan settings of a Part
Now that you’re playing two Voices at the same time, you may want to ad-
just their settings. Here, we’ll change the Volume and Pan settings of one
Part’s V oice.
Operation
1
Use the PARTPART
PARTPART
PART q buttons to select the desired Part (Part 1 or 2).
2Use the SELECTSELECT
SELECTSELECT
SELECT w buttons to call up the “Volume” display
below.
Current Volume setting.
3Use the VALUEVALUE
VALUEVALUE
VALUE q buttons to change the setting, and play the
keyboard as you make changes.
4Now that you’ve adjusted the Volume balance of the two Voices,
change one of the Part’s Pan setting. Use the SELECTSELECT
SELECTSELECT
SELECT w but-
tons to call up the “Pan” display below.
Current Pan setting.
5Use the VALUEVALUE
VALUEVALUE
VALUE q buttons to change the setting, and play the
keyboard again as you make changes.
If you want, try making changes to some of the other Part controls. The
procedure is the same: 1) Use the PART q buttons to select a Part, 2)
use the SELECT w buttons to choose the desired control, and 3) use
the VALUE q buttons to change the setting. For more information on
the Part controls, see page 36.