MX12/6, 20/6 — Owner’s Manual
4Front & Rear Panels
q
!2
!0
er
i
w
!1
!3 !4
o
t y
u
qST Master Fader
Controls the level of the signal that is sent to the ST
OUT jacks.
wMONO Control
Controls the level of the signal (the monaural signal
that is formed by combining the signals from the
STEREO bus) that is sent to the MONO OUT jack.
eGROUP 1-4 Faders
rTO ST Switch
Controls the level of the GROUP 1-4 signals, and
sends the signals to their respective GROUP
OUTPUT 1-4 jacks.
Also, when the TO ST switch is ON (>), the signals
whose levels are controlled by the GROUP faders are
also sent to the STEREO bus.
tSEND
• AUX1, AUX2 Controls
Controls the individual levels of the AUX1 and
AUX2 signals that are sent to the AUX1 SEND
jack and AUX2 SEND jack.
• EFFECT Control
Controls the level of the EFFECT bus signal that
is sent to the EFFECT SEND jack.
* This control is not related to, and has no affect on the
signal that is sent from the EFFECT bus to the built-in
digital effects.
yRETURN
• AUX1, AUX2 Controls
Controls the levels of the signals (mixed, L with
R) that are sent to the AUX1 and AUX2 buses
from the RETURN L (MONO) and R jacks.
• ST Control
Controls the level of the signal that is sent from
the RETURN L(MONO), R jacks to the STEREO
bus.
* When only the RETURN L (MONO) jack is used, the
same signal is also sent to the STEREO bus L, R.
Master Control Section