Yamaha NS-200S PLACING THE SPEAKERS, REMOVING THE FRONT COVER, ■Using as 2ch stereo speakers, ■Using as main speakers in a multi channel system, SPECIFICATION

PLACING THE SPEAKERS

■Using as 2ch stereo speakers

Better stereo images will be obtained when the speakers are slightly angled in towards the listeners.

■Using as main speakers in a multi channel system

Position the speakers on both sides of the TV. The positioning of speakers is important, because it controls the whole sound quality of a multi channel system. Set up the speakers on the basis of your listening position by following the owner’s manual supplied with your amplifier.

NS-300/

NS-200

	Subwoofer
NS-300/	Surround R
NS-200
	Center
	Surround L

REMOVING THE FRONT COVER

The front cover is fastened to the enclosure at six points, and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker. To reattach, line up the six pegs on the inside surface of the cover with the six corresponding holes on the speaker and push gently.

Note

When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools.

NS-300 ...........	2-way 3-speaker bass reflex speaker system		English
	SPECIFICATION
Type
		(Magnetically-shielded type)
NS-200 ..........	2-way 2-speaker bass reflex speaker system
		(Magnetically-shielded type)
Speaker Unit
NS-300 ....................................		16 cm (6.5”) cone woofer x 2
		3 cm (1”) dome tweeter
NS-200 .........................................		16 cm (6.5”) cone woofer
		3 cm (1”) dome tweeter
Nominal Impedance .......................................................		6 ohms
Frequency Response
NS-300 .........................................................		30 Hz – 35 kHz
NS-200 .........................................................		35 Hz – 35 kHz
Nominal Input Power
NS-300 .......................................................................		140 W
NS-200 .......................................................................		100 W
Maximum Input Power
NS-300 .......................................................................		400 W
NS-200 .......................................................................		300 W
Sensitivity
NS-300 .........................................................		91 dB/2.83 V/m
NS-200 .........................................................		90 dB/2.83 V/m
Crossover Frequency .......................................................		3 kHz
Dimensions (WxHxD)
NS-300 .................................................		212 x 900 x 317 mm
		(8.3” x 35.4” x 12.5”)
NS-200 .................................................		212 x 850 x 317 mm
		(8.3” x 33.5” x 12.5”)
Weight
NS-300 .....................................................		19.0 kg (41.9 lbs.)
NS-200 .....................................................		16.8 kg (37.1 lbs.)
Accessories ................................................................		Stand x 4
		Screw (6 mm) x 4
		Wood screw (4 mm) x 4

Washer x 4

Pad x 4

Spike x 4

Nut x 4

●Specifications subject to change without notice due to product improvements.

●Care should be taken not to exceed the input power values noted above.

5