REMOVING THE FRONT COVER

The front cover is fastened to the enclosure at four points and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker. To reattach, line up the four pegs on the speaker with the four corresponding holes on the inside surface of the cover and push gently.

Note

When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools.

E-4

SPECIFICATIONS

Type .......................................

2-way 3-speaker bass reflex

 

speaker system

 

Magnetic shielding type

Driver .......................................

13 cm (5”) cone woofer x 2

Wave guide horn 3 cm (1”) dome tweeter

Impedance ...................................................................

6 Ω

Frequency Response ................................

55 Hz to 50 kHz

Nominal Input Power ................................................

100 W

Maximum Input Power ..............................................

300 W

Sensitivity ...................................................

91 dB/2.83 V/m

Crossover Frequency .............................................

2.5 kHz

Dimensions (WxHxD) .........................

186 x 500 x 257 mm

 

(7-5/16” x 19-11/16” x 10-1/8”)

Weight ..............................................

11.5 kg (25 lbs. 6 oz.)

●Specifications subject to change without notice due to product improvements.

●Care should be taken not to exceed the input power values noted above.