Yamaha NS-515F PLACING THE SPEAKERS, REMOVING THE FRONT COVER, SPECIFICATIONS, ■Using as 2ch stereo speakers, ■Using as main speakers in a multi channel system

PLACING THE SPEAKERS

■Using as 2ch stereo speakers

Better stereo images will be obtained when the speakersare slightly angled in towards the listeners.

■Using as main speakers in a multi channel system

Position the speakers on both sides of the TV. The positioning of speakers is important, because it controls the whole sound quality of a multi channel system. Set up the speakers on the basis of your listening position by following the owner’s manual supplied with your amplifier.

NS-515F

Subwoofer

NS-515F

CenterRear effect

Note

This speaker features a magnetically shielded design, but there is still a chance that placing it too close to a TV set might impair picture color. Should this happen, move the speaker away from the TV set.

REMOVING THE FRONT COVER

The front cover is fastened to the enclosure at six points and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker. To reattach, line up the six holes on the inner surface of the cover with the six corresponding pegs on the speaker and push gently.

Note

When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools.

SPECIFICATIONS
Type .............................	3-way bass reflex speaker system
	Magnetic shielding type
Driver .........................................	16 cm (6.5”) cone woofer
	16 cm (6.5”) cone mid-woofer
	3 cm (1”) dome tweeter
Impedance ...................................................................	6 Ω
Frequency Response ................................	40 Hz to 50 kHz
Nominal Input Power ................................................	100 W
Maximum Input Power ..............................................	300 W
Sensitivity ...................................................	90 dB/2.83 V/m
Crossover Frequency ...................................	500 Hz, 3 kHz
Dimensions (WxHxD) .......................	200 x 1000 x 328 mm
	(7-7/8” x 39-3/8” x 12-15/16”)
Weight .................................................	21 kg (46 lbs. 3 oz.)
	(Including the stands)
Accessories ...................................	Stand x 4 (L x 2, R x 2)
	Screw (6mm) x 4
	Wood screw (4mm) x 4
	Pad x 4

●Specifications subject to change without notice due to product improvements.●Care should be taken not to exceed the input power values noted above.

English

E-5