Yamaha NS-6HX owner manual Attaching the Front Cover, Specifications

ATTACHING THE FRONT COVER

The speaker and the front cover are packed separately. To attach the cover, line up the six pegs on the speaker with the six corresponding holes on the inside surface of the cover and push gently.

To remove the cover, hold on to both sides and slowly pull straight away from the speaker.

Note

When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools.

	SPECIFICATIONS
Type	3-way 3-speaker bass reflex
	speaker system
	Magnetic shielding type
Driver	20 cm (8”) cone woofer

Wave guide horn 13 cm (5”) cone mid-range

Wave guide horn 3 cm (1”) dome tweeter

Impedance	6 Ω
Frequency Response	45 Hz to 50 kHz
Nominal Input Power	100 W
Maximum Input Power	300 W
Sensitivity	91 dB/2.83 V/m
Crossover Frequency	600 Hz, 4 kHz
Dimensions (WxHxD)	364 x 1062 x 397 mm
	(14-5/16” x 41-13/16” x 15-5/8”)
Weight	29.0 kg (63 lbs. 15 oz.)
Accessories	Spike x 4
	Nut x 4

●Specifications subject to change without notice due to product improvements.

●Care should be taken not to exceed the input power values noted above.

English

E-5