PLACING THE SPEAKER
cPlace the speakers on a sturdy,
cBetter stereo images will be obtained when the speakers are slightly angled in towards the listeners.
SPECIFICATIONS
Type ....................... | ||
Speaker Unit.............................................. | 20 cm cone woofer x 2 | |
|
| 10 cm cone |
|
| 2.5 cm (1”) dome tweeter |
Nominal Impedance | ........................................................... | 6 ohms |
Frequency Response............................................ | 38 Hz – 20 kHz | |
Nominal Input Power.............................................................. | 80W | |
Music Input Power................................................................ | 280W | |
Sensitivity..................................................................... | 90 dB/W·m | |
Dimensions (WxHxD).................................... | 254 x 950 x 314 mm | |
.............................................................. | (10” x | |
Weight..................................................................... | 15 kg (33 lbs.) | |
Accessories .............................................. | Speaker cable (4m) x 2 |
*Specifications subject to change without notice due to product improvements.
*Care should be taken not to exceed the input power values noted above.
Note
Bacause this speaker is not a magnetically shielded type, there may be some influence on a TV picture depending on the type of TV or the placement of the speaker. In such a case, place the speaker apart from the TV so that there is no influence on TV picture.
REMOVING THE FRONT COVER
The front cover is fastened to the enclosure at six points, and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker. To reattach, line up the six pegs on the inside surface of the cover with the six corresponding holes on the speaker and push gently.
Note |
|
When the | to touch the |
VZ 13320