SETTING UP THE SPEAKERS

•Attaching the pedestals to the front speakers (When not wall mounting)

Attach the pedestal to the front speaker as shown right by using bolts supplied with the product.

•Wall mounting the speakers

When mounting the speakers on a wall, attach one of the

Non-skid pad

Pedestal

Bolt

Philips driver

Non-skid pads

wall mounting rubber pads provided near each of the corners on the rear surface of the speaker to prevent the speaker cable from being caught between the wall and the speaker.

You can also use the screw holes on the back of the speaker for installing the speakers on commercially available speaker brackets.

Spacer for pedestal

Bottom of the front speaker

Front Speakers

Surround Speakers

3-11/16” (93.5 mm)

17” (432 mm) 12-5/16” (312 mm)

Center Speaker

A screw with a diameter of 1/4” can be used. (Hole depth: 9/32”)

 

 

 

3-11/16” (93.5 mm)

7/16”-4

(113.3mm)

 

 

A screw with a diameter

 

 

 

 

 

 

 

of 1/4” can be used.

 

 

 

 

(Hole depth: 9/32”)

25/8”-4-3/8”

(60mm)(117.2mm)

(25410”mm)

(1841/4”-7 mm)

2-3/8” (60 mm)

 

 

 

 

 

2

 

 

 

 

1

Wall / wall support

Min 1”

7/32”

Tapping screw (Available at the hardware store)

17” (432 mm)

12-5/16” (312 mm)

3-11/16” (93.5 mm)

4-5/8”

 

2-3/8” 4-7/16”

 

 

 

 

 

 

A screw with a diameter of 1/4” can be used.

 

 

 

 

 

 

(117.2 mm)

(60 mm) (113.3 mm)

(Hole depth: 9/32”)

 

Wall / wall support

Min

1”

7/32”

When using speaker brackets to mount the speakers on a wall or ceiling, it is strongly recommended that safety wire, which may be included with the bracket, be used between the speaker and the bracket to prevent the speaker from falling.

Fasten screws into a firm wall or wall support as shown in the figure, and hang the holes of the mounting bracket on the protruding screws.

4Make sure that the screws are securely caught by the narrow sections of the “key hole” opening.

NS-AP8805