CONNECTIONS TO YOUR AMPLIFIER

This speaker system is capable of standard connections and bi-wired connections. Before making connections, make sure that the amplifier is switched off.

<Standard connections>

 

 

■CONNECTIONS

Leave the short

 

• Connect the screw-type input terminals at the rear of the

bars in place

 

speaker to the speaker output terminals of the amplifier

when

 

(or receiver) with the speaker cable.

connecting.

 

 

• Connect the (+) terminals on the amplifier (or receiver)

 

 

Short bar

 

and the speaker using one side of the cable. Connect the

 

(–) terminals on both components using the other side of

 

Tighten

Loosen

the cable.

 

 

 

• Connect the speaker to the center terminals of your

 

 

amplifier, making sure not to reverse the polarity (+, –). If

 

+

the speaker is connected with reversed polarity, the

 

–

sound will be unnatural and lack bass.

 

 

 

 

How to connect:

 

NS-C7HX

1 Loosen the knob.

 

2 Insert the bare wire. [Remove the insulation coating at

 

 

 

 

the extremity of each speaker cable by twisting the

 

 

coating off.]

 

 

3 Tighten the knob and secure the cable.

 

 

Test the firmness of the connection by pulling lightly on

 

 

the cable at the terminal.

 

CENTER

Note

 

Do not let the bare speaker wires touch each other as

 

+

 

this could damage the speaker or the amplifier, or both

 

 

 

–

of them.

 

 

Amplifier or

Receiver

E-2