Quick-Connect Guide

NS-FP9500Home Cinema Speaker Package

Yamaha created this package to greatly enhance your audio and home theater enjoyment. This Quick-Connect Guide will help you get started. Follow the steps to assemble and connect the speakers first. Refer to your Owner’s Manuals as well as those that came with your other components for complete instructions and precautions. Be sure to turn off all power while making connections. You will need the following which are not included in the package: Phillips screwdriver, wire cutter/stripper, brackets, toggle bolts, molly anchor screws or sheet metal screws.

In the Box

 

 

 

(2)

 

 

 

 

(8)

 

 

 

 

 

 

 

 

 

 

 

 

 

(4)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Inspect Contents After unpacking, inspect the contents to confirm you have the above items: two main speakers, three rear speakers, one center speaker, speaker wire, two bases, two speaker stands, two finishing brackets, RCA cable, one bag each of long screws (8) and short screws (4), center speaker bracket and screw, subwoofer, non-skid pads for base, non-skid pads for stands, and cable protection seal for base.

3

use this size screw Main Speaker Assembly

Attach Bases to Stands Apply the non-skid pads as shown in the inset. Identify both speaker stands and both bases and attach using short screws as shown.

6

7

Rear

 

 

 

 

Speakers

Connect Main Speaker Wire For illustration purposes, stand, which is now attached to speaker, is not shown in diagram above. Locate screw-type input terminals at the rear of each of the speakers. Connect the speaker wire as shown. The positive

(+)side of the wire with the white stripe attaches to the red terminal. The negative (-) side attaches to the black terminal. (Please see your NS-FP9500 Owner’s Manual for more detailed instructions on speaker wire connections.) Place assembled main speakers in desired location to the left and right of the viewing/audio source. (See Step 2, Room Layout.)

NOTE Banana plug connectors (not included) can be used to connect speaker wire to speaker terminals. Please see your Owner’s Manual for directions.

��������������

5

Attach Main
Speakers Lay stands
down. Line up holes

 

so that oval opening

 

is near speaker wire

 

connections on speaker.

 

Attach main speakers

 

using long screws as

 

shown. Attach cable

 

protection seal to

 

base as shown in inset.

Speaker

Wire

use this size screw

8

 

3

 

"

1

/

 

 

4

Attach Finishing Brackets on top of two speaker stands.

9

Front Center Speaker Assembly

Attach Bracket and Speaker Wire Attach bracket to center speaker using supplied screw as shown. Attach speaker wire as shown in Step 6.