■To mount the speaker on a wall by using the attached mounting bracket

Fasten screws into a firm wall or wall support as shown in the figure, and hang the holes of the mounting bracket on the protruding screws.

*Make sure that the screws are securely caught by the narrow parts of the holes.

Tapping screw (3.5–4 mm) (Available at the hardware store)

Min.

20 mm

3 mm

40 mm

Wall/ wall support

You can also use the screw holes on the rear of the speaker for installing the speaker using a commericially available speaker bracket (if you do not use the attached mounting bracket).

Screw holes

Diameter: 4 mm

Hole depth: 12 mm

60 mm

WARNING

●This speaker weighs 5.0 kg (11 lbs.). Do not mount it on thin plywood or a wall with soft surface material. If mounted, the screws may come out of the flimsy surface and the speaker may fall. This damages the speaker or causes personal injury.

●Do not install the speaker to a wall with nails, adhesives, or any other unstable hardware. Long- term use and vibrations may cause it to fall.

●To avoid accidents resulting from tripping over loose speaker cable, fix it to the wall.

E-2