When placing the speakers on a flat surface, attach the included nonskid pads to the corners on the bottom of the speakers as shown on the left. This prevents the speakers from sliding around.
Nonskid pad
* For
If you want to mount a speaker on a commercially available speaker stand for the main/rear speakers (and rear center speaker for
Mounting bracket
Screw
The provided mounting bracket with 1 pair of screw holes (at an interval of 60 mm) can be used to mount the speaker on a speaker stand.
* Those screw holes can be used with M4 screws only.
1 Attach the bracket to the bottom of the speaker by using the provided screw so that the convex part of the bracket fits in the grooved part on the bottom of the speaker as shown on the left.
2 Mount the speaker on the speaker stand by using the screw holes on the bracket.
Note
The mounting bracket is provided for each speaker.
60 mm