Mounting the front and surround speakers

You can place the front and surround speakers (and surround back speaker in an NS-P276 system) on a shelf or rack, set them on the floor, or mount them on a wall or speaker stand.

Installing the speakers on commercially available speaker stands:

You can mount the front, surround, and surround back speakers on a speaker stand. When you installing the speaker on commercially available speaker stand, you need to attach a bracket to the bottom of the speaker using a screw.

To mount the speakers on a wall:

1.Affix screws to a firm wall or wall support as shown below. (Use tapping screws 3.5 to 4mm in diameter.)

Wall/ wall

 

Rear view

 

 

support

 

 

70 mm

Holes

70 mm

 

10 mm

Minimum

20mm

2.Suspend the speaker by mounting the holes in the speaker’s rear panels on the protruding screws.

70 mm

Note: Make sure that the screws are securely affixed in the narrow part of the holes.

Cautions:

•Each front or surround speaker weighs 0.8 kg

(1.8 lbs.). Do not mount the speakers on thin plywood or on a wall made of soft surface material. Otherwise, the screws may pull out of the surface and the speak- ers may fall, possibly damaging the speakers or caus- ing personal injury.

•Do not affix the speakers to a wall using nails, adhe- sives, or unstable hardware. Long term use and vibra- tion may cause the speakers to fall.

•To avoid accidents resulting from tripping over loose speaker cables, affix the cables to the wall.

•Mount the speakers in a wall location that will be unlikely to result in injury to an individual’s head.

Bracket (AAX34790) (option)

M4 screw (AAX12390) (option)

Insert only M4 screws through

the outside holes. 60 mm (2-3/8”)

5