Mounting the main/rear/center speakers (and rear center speaker for NS-P436) on the wall

1 Tapping screw (Available at the hardware store)

Diam. 3.5 to 4 mm

Min. 4 mm 20 mm

Wall/ wall support

2

Main/rear/rear center (for NS-P436)

You can mount the main, rear and/or center speakers (and/ or rear center speaker for NS-P436) on a wall.

To mount the speakers on a wall, use the holes of the brackets attached on the speakers’ back panels.

Main/rear/rear center (for NS-P436)

Holes

Center

26 mm

1 Fasten two screws into a firm wall or wall support at the interval shown below.

Main/rear/rear center (for NS-P436)

.......... 26 mm (1”)

Center .............................................

222.8 mm (8-3/4”)

2 Hang the speaker by mounting the holes on the protruding screws.

* Make sure that the screws are securely affixed by the narrow parts of the holes.

Center

 

WARNING

 

● Each speaker weighs as follows.

 

222.8 mm

 

Main/rear/rear center (for NS-P436)

......................................................

1.2 kg (2 lbs. 10 oz.)

Center ..........................................

1.7 kg (3 lbs. 12 oz.)

Do not mount them on thin plywood or a wall composed of a soft surface material. If mounted, the screws may pull out of the flimsy surface and the speakers may fall. This may damage the speakers or cause personal injury.

● Do not affix the speakers to a wall using nails, adhesives, or any other unstable hardware. Long- term use and vibrations may cause the speakers to fall.

● To avoid accidents resulting from tripping over loose speaker cables, fix the cables to the wall.

● Select an appropriate position on the wall to mount the speaker so that no one will injure his/her head or face.

E-5