Yamaha NS-SW700 AUTOMATIC POWER-SWITCHINGFUNCTION, 11 En, Changing the AUTO STANDBY setting

AUTOMATIC POWER-SWITCHING FUNCTION

This function automatically switches the unit between standby and power-on mode.

The subwoofer automatically places itself in standby mode if it does not receive an input signal for 7 or 8 minutes. (The power indicator lights red.)

When the subwoofer detects a bass signal input of below 200 Hz, it automatically places itself in power-on mode. (The power indicator lights green.)

Notes

•This function is available only when the POWER switch and STANDBY/ON button are set to ON.

•Noise received from other appliances may extend the time period before the subwoofer places itself in standby mode to more than 8 minutes.

Changing the AUTO STANDBY setting

1Set the subwoofer to standby.

2Change the AUTO STANDBY setting.

-LOW: Select this position to activate this function.

-HIGH: If this function does not operate with AUTO STANDBY switch set to LOW, select this position so that the subwoofer detects input signals with a lower level and switches the power on automatically.

-OFF: Select this position to deactivate this function, for example, when the subwoofer switches the power on unexpectedly by sensing noises from other appliances.

English

11 En