PLACING THE SPEAKERS
Place the speakers on a sturdy,
■Using as 2ch stereo speakers
Better stereo images will be obtained when the speakers are slightly angled in towards the listeners.
■Using as front speakers in a multi channel system
Position the speakers on both sides of the TV. The positioning of speakers is important, because it controls the whole sound quality of a multi channel system. Set up the speakers on the basis of your listening position by following the owner’s manual supplied with your amplifier.
■Using as presence or surround speakers
Mount the speakers on a wall or place the speakers on a shelf. Determine the best position by following the owner’s manual supplied with your amplifier.
■To mount the speaker on a wall by using the attached mounting bracket
Fasten screws into a firm wall or wall support as shown in the figure, and hang the holes of the mounting bracket on the protruding screws.
*Make sure that the screws are securely caught by the narrow parts of the holes.
Tapping screw
Min.
20 mm
3 mm
40 mm
Wall/ wall support
You can also use the screw holes on the rear of the speaker for installing the speaker using a commericially available speaker bracket (if you do not use the attached mounting bracket).
Center
Subwoofer
Screw holes Diameter: 6 mm Hole depth: 15 mm
60 mm
Note:
This speaker features a magnetically shielded design, but there is still a chance that placing it too close to a TV set might impair picture color or create a buzzing noise. Should this happen, move the speaker away from the TV set.
WARNING:
•This speaker weighs 3.8 kg (8.4 lbs). Do not mount it on thin plywood or a wall with soft surface material. If mounted, the screws may come out of the flimsy surface and the speaker may fall. This damages the speaker or causes personal injury.
•Do not install the speaker to a wall with nails, adhesives, or any other unstable hardware. Long- term use and vibrations may cause it to fall.
•To avoid accidents resulting from tripping over loose speaker cable, fix it to the wall.
