Yamaha NX-SW70 ■Connect the speaker cords to the speaker terminals on the subwoofer, ■Connect the speaker cords to the speaker terminals on the rear speakers

Insert the bare wire of the speaker cord into the hole.

CONNECTIONS

■Connect the speaker cords to the speaker terminals on the subwoofer.

3 1 Tab

2

Bare wire

1Hold up the tab for the + terminal (red), or hold down the tab for the – terminal (black).

2Insert the bare wire of the speaker cord into the hole.

3Release the tab.

•Connect the line-in cord to the + terminal (red), and the other cord to the – terminal (black).

•Once connected, pull gently on the speaker cords to check that they are connected securely.

CAUTION

•Do not let the bare speaker wire touch each other and do not let them touch any metal part of the speakers. This could damage the speakers.

•Do not mistakenly connect plus (+) to minus (–) or vice versa when connecting speaker cords.

•Insert the speaker cords securely so that plus (+) and minus (–) do not short. The speaker may not output any sound or may output noise, causing damage to the speakers, if speaker cords are not inserted securely.

•Only insert the bare wire portion of the speaker cords into the holes. Sound will not be output if you insert as far as the plastic insulation part of the cord.

•Secure the speaker cords so that they will not catch on hands or feet.

■Connect the speaker cords to the speaker terminals on the rear speakers.

1 Hold down the tab.

2

2

3

1

	3 Release the tab. (The tab will return to its
Bare wire	original position when you release your
	finger.)
Tab	• Connect the line-in cord to the + terminals (red) on the
	right, and the other cord to the – terminals (black) on the
	left.
	• Once connected, pull gently on the speaker cords to
	check that they are connected securely.

6