84
Troubleshooting
If initialization cannot be
performed on the Web
interface, such as when
a wrong IP address has
been set for the PJP-MC24,
perform the following
operation.
1 Turn the PJP-MC24 off.
There is no need to disconnect the cables.
2 Turn on the PJP-MC24 while pressing the
INIT switch.
This switch is located at the bottom of a small
hole. Press it using the tip of a precision
screwdriver, ball-point pen or other object
with a sharp tip.
The LEDs on the front panel of the PJP-MC24
blink several times.
3 Release the INIT switch.
All settings of the PJP-MC24 return to the
factory settings.
Since all items you have set are initialized,
you must congure all settings again.
You can recover the PJP-MC24’s factory settings.
Note
When recovering initial settings, please keep in mind the
following:
• All communications will be interrupted when the
recovering initial settings is nished.
• All settings with initial values will return to those
values.
• All registered addresses will be deleted.
• Non-volatile memory will be overwritten.
• The process is irreversible. You cannot undo the
initialization.
Initializing on the Web
interface
You can initialize the PJP-MC24 (recover its factory
settings) from Recover Initial Settings page.
For more information, click the help icon on the Web
interface to display an explanation of the settings.
How to Access the Recover Initial Settings
Page
Click the following items in the Web interface:
Maintenance on the main window while logged
in as an administrator.
Execute, next to Recover Initial Settings under
Special Functions.
Initializing the PJP-MC24
POWERALARMSTATUSIN
LAN
CONFERENCE
LINK
/
DATASPEED
OUTIN
AUDIOCONSOLE
PROJECTPHONE
2
1
OUTINIT